KENOVA set line V123
“The handy table top device for anyone wanting to measure quickly and easily.”
The KENOVA set line V123 is the flexible tool presetter with a host of benefits. The unit is perfect for quick tool presetting directly at the machine or in the workshop. It is also an ideal additional unit for a central setting room. The V123-device is the correct choice for determining quick and reliable measurements.
Technical Data:
-
Measuring range: Diameter: 200 mm, Longitudinal axis: 300 mm;
-
Digital measured value display 0.01 mm, repeat accuracy 0.01 mm;
-
Mechanical cutting edge scanning Precision dial gage display: 0.01 mm;
-
Base with hardened and ground basic adaptor ∅ 75 mm;
-
Stable measurement support column, precision-guided measuring slide;
-
Quick adjustment for measuring slide;
-
Fine adjustment using trapezoidal thread;
-
Rotating precision tool holder, hardened and ground with gauges X and Z for zero point adoption / different taper sizes of exchangeable adaptor sleeves;
-
Any zero point selection;
-
Required space: L × W × H = 424 × 242 × 692 mm;
-
Weight: 44 kg.
KENOVA set line V345 / V466 C
“The robust and precise mid-class device is perfect for inclusion in smart production processes.”
KELCH offers the perfect solution to meet the growing requirements from industry with its tool presetters from the INDUSTRIAL line. High quality coupled with the option of digital networking in the factory.
Technical Data:
-
Measuring range: Diameter: -5…400 mm, Longitudinal axis: 500 mm / Diameter: -5…600 mm, Longitudinal axis: 600 mm;
-
A stable unit made of torsion-resistant steel profiles and two linear guides with linear ball bearings form the basis of both axes;
-
Rigid, highly-precise construction of the X and Z axis;
-
The endless fine adjustment on both axes enables micrometre-precise setting of the axes;
-
Pneumatic one-hand operation allows both axes to be quickly adjusted, individually or together if desired;
-
Highest level of measuring precision through precise brand-name glass scales on both axes;
-
Required space: L × W × H = 1163 × 475 × 1093 mm / 1393 х 475 х 1211 mm;
-
Weight: 190 / 220 kg.
KENOVA set line V3xx
“The new INDUSTRIAL line: compact, reliable, precise and flexible.”
The new range features EASY software, which can be operated without programming knowledge and integrated into automated processes and networked production systems.
Technical Data:
-
Measuring range: Diameter: -100…400 mm (optional -100…600 mm), Longitudinal axis: 600 mm;
-
Compact grey cast iron design for use in the most confined spaces;
-
Convenient positioning of the axes by pneumatically released quick adjustment mechanism;
-
Available in three versions: Manual, Autofocus, Fully CNC;
-
Additional fine adjustment: Manual and Autofocus using handwheels, Fully CNC: fine adjustment of the 3 axes using a virtual control panel;
-
High-precision tool spindle with direct SK 50 interface and integrated calibration balls. Optionally with pneumatic tool clamping;
-
CMOS camera with telecentric optics and lighting for ± 2 µm repeatability;
-
PC electronics with intelligent image processing;
-
24″ TFT monitor, 10″ monitor on camera carrier (optional);
-
Required space: L × W × H = 1267 × 570 × 1273 mm;
-
Weight: 300 kg.
KENOVA set line V6хх
“The new compact premium tool presetter for maximum precision in the most compact spaces.”
The KENOVA set line V6 series guarantees fast, easy and precise measurements coupled with maximum possible process reliability from patented systems. The compact PREMIUM line system can be integrated very easily into an ergonomic workplace design, leaving plenty of space for tools and materials.
Technical Data:
-
Measuring range: Diameter: -100…430 mm (optional -220…310 mm), Z = 600 / 800 / 1000 mm;
-
Compact grey cast iron design for use in the most confined spaces;
-
Convenient positioning of the axes by pneumatically released quick adjustment mechanism;
-
Additional fine adjustment: Manual and Autofocus using handwheels, Fully CNC: joystick fine adjustment of the 3 axes;
-
Modular precision spindle to accommodate diverse SK, HSK, PSC, VDI etc. Inserts;
-
Positional fixing: Manual: by mechanical clamp and brake, Autofocus / CNC: by a coupling;
-
CCD camera with telecentric lens and top light for ± 2 µm repeatability;
-
Optional: optical turning centre measuring equipment;
-
S-camera for tool grinders;
-
Probe for cutting edges difficult to access;
-
PC electronics with intelligent image processing;
-
24″ TFT monitor, 10″ monitor on camera carrier (optional);
-
Required space: L × W × H = 1784 × 1158 × 1995 / 2195 / 2395 mm;
-
Weight: 475 / 505 / 535 kg.
KENOVA set line V9xx
“The revolution in tool presetting.”
Ease of use coupled with maximum precision. This range is modern, ergonomically designed and unique in its design. With its mineral cast base, cast in one piece from the guideway to the floor, KELCH is setting new benchmarks in the design of tool presetters. This design promises durable and consistent mechanical KELCH quality.
Technical Data:
-
Measuring range: Diameter: -100…530 / 830 / 1030 mm (optional -220…410 / 710 / 910 mm), Z = 600 / 800 / 1000 / 1200 mm;
-
Fully CNC tool presetter;
-
Thermally stable and vibration-dampening mineral cast composite base;
-
Excellent load-bearing capacity and stability; ment
-
3 axes, CNC;
-
Optional: 4th axis for automatic length adjustment;
-
CCD camera with telecentric lens and top light;
-
Optional: optical turning centre measuring equipment;
-
S-camera for tool grinders;
-
Probe for cutting edges difficult to access;
-
PC electronics with intelligent image processing;
-
24″ TFT monitor, 10″ monitor on camera carrier (optional);
-
Modular precision CNC spindle;
-
Inserts for all common tool holders;
-
Required space (with TUL rack V): L × W × H = 2630 × 1110 × 1924 / 1505 / 1535 / 1565 mm;
-
Weight (with TUL rack V): 1475 / 1505 / 1535 / 1565 kg.
KENOVA set line V9xx-S
“Precise shrinking and setting in one unit.”
Shrink grip and shrink release, measurement and presetting – the KENOVA set line V9xx-S offers all this and more. A tool presetter combined with an inductive shrink fit device.
Technical Data:
-
Measuring range: Diameter: -100…530 mm (optional -220…410 mm), Z = 600 / 800 mm;
-
Fully CNC tool presetter and shrink fit device;
-
Thermally stable and vibration-dampening mineral cast composite base;
-
Excellent load-bearing capacity and stability;
-
5 automatic axes, 4 of which designed as CNC axes;
-
CCD camera with telecentric lens and top light;
-
Optional: optical turning centre measuring equipment;
-
S-camera for tool grinders;
-
Probe for cutting edges difficult to access;
-
PC electronics with intelligent image processing;
-
24″ TFT monitor;
-
10″ TFT monitor on camera carrier (optional);
-
Modular precision CNC spindle;
-
Inserts for all common tool holders;
-
Modular precision CNC spindle;
-
Inserts for all common tool holders;
-
Automatically movable induction coil;
-
For HSS and carbide;
-
Optional: Smoke removal extraction system;
-
Separate cooling station, completely decoupled from the thermally critical presetting part; simultaneous cooling of 3 shrink chucks;
-
Contact cooling with cooling adapters through which water flows and modular inserts;
-
Cooling time about 60 seconds;
-
Required space (with TUL rack V): L × W × H = 3050 × 1350 × 1924 / 2124 mm;
-
Weight (with TUL rack V): 1648 / 1678 kg.
KENOVA set line H3
“The new compact entry-level tool presetter for horizontal tool measurement.”
Thanks to its compact design, the horizontal tool presetter is ideal for small and medium-sized businesses. Do you have a clear need for tool measurement and require a stable and precise measuring system? KELCH offers this option with the innovative development of the KENOVA set line H343. A further benefit includes
possible connection to tool management systems.
Technical Data:
-
Measuring range: Diameter: 400 mm, Z = 300 mm;
-
Compact grey cast iron design for use in the most confined spaces;
-
Convenient positioning of the axes by pneumatically released quick adjustment mechanism and also endless fine adjustment;
-
Versatile table layouts with tool holders with diverse interfaces (VDI, HSK, PSC, Index etc.), manual modular precision spindle, universal tool spindle and customised fixings;
-
Telecentric optics, lighting and CCD camera with various control and evaluation programs: CoVis and EASY;
-
Required space (with TUL rack V): L × W × H = 1784 × 886 × 1570 mm;
-
Weight (with TUL rack V): 460 / 475 kg.